AppletHost: setPreloadFullRepresentation(true) does not guarantee
fullRepresentationItem() is non-null on return — the applet loads
asynchronously. Wire a single-shot connection to
fullRepresentationItemChanged to emit appletReady() when the item
arrives.
TaskWidget: operationDescription() can return null for an unknown
operation name; bail out rather than dereferencing it.
Qt.rgba expects 0.0–1.0 floats. Passing 255 for R/G/B saturates
every channel to 1.0, producing opaque white instead of the
intended semi-transparent tint. Fix all call sites across
FavouritesBar, StatusBar, and AbstractDelegate.
The mobile popup system always anchored to top-center which
looked out of place on a desktop screen. In convergence mode,
position popups at the bottom-right corner and slide them in
from below. Swipe-to-dismiss flips to match (drag down to
dismiss instead of up). Stacked card previews and the popup
drawer tap area are hidden since notifications are already
accessible in the action drawer.
Replace the full-screen slide-down sheet with two fade-in cards
anchored to the top corners. Quick settings sit top-right,
notifications top-left capped at 60% screen height. Background
scrim reduced to 30%. Redundant clock header and status bar
hidden since both are already visible in the top panel.
Wi-Fi, Bluetooth, Sound and Battery behave differently from
toggle tiles: tapping them should open a detail panel, not
flip a switch. On a phone the long-press convention handles
this, but with a mouse long-press is unnatural.
Pull these four tiles out of the grid when convergence mode
is active and show them as full-width rows above the remaining
tiles. Each row has two click zones — a toggle pill on the
left that still switches the service on/off, and a detail
area on the right (name, status, chevron) that opens the
Plasma applet popup. The grid hides the duplicates so they
only appear once.
Long-pressing a mapped quick-settings tile in convergence
mode opens a floating popup with the Plasma applet UI
instead of launching System Settings. Unmapped tiles still
open Settings.
AppletHost creates a standalone Corona to host applets
outside the shell containment tree.
open() alone does not set intendedToBeVisible, so the drawer
immediately closes itself. Call the proper toggle path instead.
Also hide the drag handle since convergence users click.
Desktop users have no visual cue that the top bar opens quick
settings. Fade in a small arrow-down icon at the bottom center
when the mouse hovers, matching the arrow-up hint on the
favourites bar.
Drawer is inside the homescreen, which sits behind windows.
Home button minimized everything to reach it. Render it in
a LayerTop window instead and skip the blanket minimizeAll
in the D-Bus handler.
In phone mode, tapping a running app activates its existing
window. In convergence mode this prevents launching a new
instance of the same application.
Skip activateWindowByStorageId when convergence mode is
enabled so that launchApp is always reached, matching
standard desktop launcher behaviour.
The page dots were non-interactive so clicks fell through to the
swipe area and closed the drawer. Set interactive:true and sync
the index back to the SwipeView so clicking a dot switches pages.
Mouse users had no visual cue that clicking the status bar
toggles the action drawer. Add a subtle background highlight
on hover so the bar signals interactivity.
In convergence mode the separate navigation panel is redundant
with window title-bar controls. Remove it by setting its
thickness to zero and visibility to false, then embed Home and
Overview buttons at the left and right ends of the favourites
bar. Running application icons with context menus are shown
between the favourites and the Overview button.
Add HomeScreen::triggerOverview() to invoke the KWin Overview
shortcut over D-Bus so the homescreen containment can open it
without access to the task-panel Plasmoid.
Show numbered desktop indicator buttons between the nav buttons and
the keyboard toggle corner button. Each button highlights the current
desktop and switches on click via VirtualDesktopInfo.requestActivate.
Only visible in convergence mode when multiple desktops exist.
Add Minimize and Maximize/Restore actions to the task strip
right-click context menu alongside the existing Close action.
Reintroduce StatusNotifierModel-based system tray icons, gated on
convergenceModeEnabled. Desktop apps (KDE Connect, nm-applet, etc.)
expose tray icons that were removed in 1914e9be as unusable on
phone screens.
The status bar wrapper is raised above the ActionDrawerOpenSurface
so tray icon MouseAreas receive click events while non-interactive
areas still fall through to the swipe handler.
TaskWidget.qml supports left-click (Activate), right-click
(ContextMenu), hover tooltip, and hides Passive/ApplicationStatus
items. The lockscreen SIGABRT guard (disableSystemTray) is restored
on the action drawer's StatusBar instance.
In convergence mode, show a running-app icon strip in the navigation
panel using the existing TaskManager.TasksModel. Each icon activates
its window on click, with an indicator dot for the active window.
Replace the mobile task switcher button with a KWin Overview trigger:
add triggerOverview() to TaskPanel (D-Bus call to kglobalaccel), swap
the button icon to view-grid-symbolic, and enable the Overview effect
in the envmanager KWin config when convergence mode is active.
Wire convergenceMode and taskModel properties from
NavigationPanelComponent through to NavigationPanel so the task strip
populates from the existing TasksModel instance.
Use the new SwipeArea clicked() signal to open/close the action
drawer on a single click when convergence mode is enabled. The
existing swipe gesture remains available as a fallback.
Emit clicked() when a press-and-release occurs without any swipe
movement. This allows consumers to distinguish taps from swipe
gestures on the same surface.
Add PLASMA_MOBILE_LOCAL_KAUTH_INSTALL CMake option to redirect KAuth
helper executables, D-Bus service files, and polkit policy files into
CMAKE_INSTALL_PREFIX instead of hardcoded /usr paths.
Guard KF6Auth find_package calls in helper subdirectories with
if(NOT TARGET KF6::AuthCore) to avoid re-running find_package after
the top-level override, which would revert generated service Exec
paths back to /usr/libexec/kf6/kauth.
I noticed at some point after updating my main phone, that non visible external device batteries started taking up extra space in the statusbar. This fixes the issue by filtering out external device batteries by using KSortFilterProxyModel.
Before (with external peripheral connected)
{width=399 height=28}
After
{width=399 height=28}
The system tray has not been useful on mobile and isn't particularly
interactable due to its small size. Remove the system tray from the
status bar, if we need its functionality it would be more appropriate to
create a larger "tray UI" in the quicksettings area
This adds a gesture handle mode to the navigation panel, which can be
enabled during gesture-only mode. This reserves space for the system
gesture to be able to be used, allowing us to extend the height in KWin
of the gesture recognition area (which is currently far too short for devices such as Pixel 3a).
This also allows for navigation with a mouse; clicking on the handle
triggers the task switcher, holding it triggers the "home" action.
The startup feedback uses theme adjusted colors, we can use standard
foreground colors for the panels for better contrast rather than relying
on the shadow.
This adds support for specifying options needed to deal with phone
display panel pecularities (ex. screen curves, notches, punch holes)
This is implemented as settings in ~/.config/plasmamobilerc, which can
set panel heights, paddings, and center spacings to duck display
cutouts. The pixel values are scaling independent, and so are not
affected when the display scaling is changed.
This is then exposed over DBus, so that components from outside of
plasmashell (ex. KWin) can access it easily without needing to connect to
kscreen themselves. Each screen is exposed as a single object.
Currently support is only added in the status bar and the navigation
panel.
Currently all screens have the settings applied. In the future, we may
want to limit this just to the internal screen (?)
---
This also adds a "devices" folder (in `devices/configs`) where per-device configs can be set.
This is installed to `/usr/share/plasma-mobile-device-configs`.
In `plasmamobilerc` (installed to `/etc/xdg/plasmamobilerc`, or
`~/.config/plasmamobilerc`), envmanager will read:
```toml
[Device]
device=oneplus-enchilada
```
for the device config to use and write its settings to
`~/.config/plasma-mobile/plasmamobilerc`.
Don't block plasmashell when doing kscreen calls (make them async). Also
add a nullptr check to rotationplugin, which potentially could be a fix
for crashes on the PinePhone.
Currently with a light theme, often colors calculated from icons are incredible bright and vivid. This can cause the user to be flashed all of a sudden with a bright color when launching an app. This commit adopt the dark background blending scheme for all usecases.
When plasmashell is started and the user had set docked mode, it may get
reset. This patch makes sure that we don't change the user's choice
after hotplugging/unplugging a display. The initial setting of
convergendeMode (if true) is now remembered.
Signed-off-by: Sebastian Kügler <sebas@kde.org>
This commit changes the action drawer colorsets to be contextually correct. The panel background would use the window background colors (instead of the view ones), and quicksettings delegates would use colors from the Button color set (rather than the view).
This also changes the background scrim to always be dark even in light mode. I think this is important to do because we have two views (notifications, and quick settings), which currently don't have much in the way of colours to distinguish the two.
This commit also makes some changes to the notifications widget in order for its card foreground to be the standard theme colors.
{width=200}
{width=200}
{width=300}
{width=200}
{width=200}
{width=300}
This ensures that all elements in the volume OSD get the window
visibility and can turn off any listeners. This avoids excessive
bindings being triggered when the osd is closed and audio is played.
This changeset makes the shell respect the quickSettingsColumns mobile
shell setting. It renders the number of columns correctly and makes the
drawer wider, as needed.
As a side-effect, the width is now more dpi-independant since it
switches from raw pixel values to gridUnit.
Another side effect is that we make the individual quicksettings buttons
ever so slightly wider (5.333 gridUnits before, gridUnits now).
Signed-off-by: Sebastian Kügler <sebas@kde.org>
This change adds a property to the shellsettings plugin to allow
changing the number of columns in the QuickSettings drawer in the top
panel. It defaults to the current value, 3.
This will allow us to accommodate for wider displays where the current
drawer unnecessarily paginates (and thus hides some of) the
quicksettings.
Minimum is still 3 since that it computes in the drawer code (and
currently not necessary to change), maximum is somewhat arbitrarily, 7.
Signed-off-by: Sebastian Kügler <sebas@kde.org>
Fixes https://invent.kde.org/plasma/plasma-mobile/-/issues/422
This commit simplifies the AudioInfo data provider to fetch the volume
directly, rather than relying on a series of complicated connections. It
also does some cleanup of AudioInfo, removing unused functions.
This avoids the following error for haptic events when used from QML:
```
QVariant: Provided metatype for 'QCoro::Task<void>' does not support destruction and copy construction
```
This commit makes a much needed cleanup and overhaul of the volume OSD.
Changes:
- Fix context menus for app streams
- Remove dedicated mute button in cards (simplifies the UI for touch
devices)
- Add selection background for card delegates
- Sync audio models with plasma-pa
- Simplify implementation of cards
- Sync volume slider implementation with plasma-pa
A custom 0.95 opacity was added to the panels in
https://invent.kde.org/plasma/plasma-mobile/-/merge_requests/642 for
overlaying applications. This
required some complicated logic and layering to mix with other modes of
operation. Since this broke at some point, simplify the logic completely
so that it's just a flat colour. This also fixes the navigation panel
not having a colour when the keyboard is shown over the homescreen.
Fixes: https://invent.kde.org/plasma/plasma-mobile/-/issues/423
We currently listen to when the volume changes, which wouldn't happen if
the user reaches 0% or 100% and continues trying to press the volume
button. Instead, listen to OSD events for determining when to open the
popup.
This converts many of the animation durations to Kirigami units so that
they can be controlled system wide. It also speeds up several of the
animation durations (ex. in folio) from 800ms to 400ms to improve the
feel and responsiveness of the shell.
Fixes typos in various source comments.
Found via `codespell -S "*.po,*.svg,*.pgm,*.xml,./po,*.desktop,*.json,*.actions" -L aline,aparent,childs,distroname,indexin,indx,logicaly,lokal,nd,splitted,te`
This popupprovider takes care of automatically enabling and disabling
convergence / docked mode when a monitor is plugged in or unplugged.
It uses the plugin that is provided with the kscreenosd quicksetting,
which essentially notifies of outputs being added and removed.
Signed-off-by: Sebastian Kügler <sebas@kde.org>
When a quicksetting is changed to not available, it should be removed
from the model. The proper API call to beginRemoveRows() has the index
of the last removed element as last parameter and will fail with null.
This patch makes dynamically removing a quicksetting by changing the
available property to false.
Signed-off-by: Sebastian Kügler <sebas@kde.org>
Ensure that all of the variables have their initial state fetched at the
start with the shell DBus client. Also ensure that they only emit
property changes when they actually happen.
Change the "toggleDoNotDisturbMode" function to "setDoNotDisturbMode"
and add a parameter so that we actually set the mode to the intended
value, not just flip it.
